JJ2030A Light High-Mobility 4×4 Mission Vehicle
Built for the gap between compact UTVs and heavy mission vehicles
The JJ2030A is a lightweight, diesel-powered, right-hand-drive 4×4 platform designed for rapid response, emergency rescue, field reconnaissance, personnel transport and unmanned-system support in difficult terrain. With a maximum specified gross vehicle weight of 3,200 kg, seating for up to six people, 600 km road range and 800 mm fording capability, the JJ2030A combines the mobility of a lightweight off-road vehicle with the endurance and mission flexibility required for sustained field operations. Its modular body structure, long-travel independent suspension and configurable rear mission area allow the vehicle to be adapted for disaster response, remote-site logistics, medical evacuation, border patrol, anti-poaching, UGV deployment and UAV support.
Key Performance
⚪ Maximum specified road speed of at least 100 km/h
⚪ Minimum 340 mm ground clearance at full load
⚪ Right-hand-drive configuration
⚪ Operation at altitudes of 4,000 m or above
Payload Definition
Payload allowance includes occupants, personal equipment, optional vehicle equipment and installed mission systems.
One Platform. Multiple Missions.
Powered by SAE
A Manned Forward Node for Connected Operations
When integrated with the SAE operational architecture, the JJ2030A becomes more than a vehicle. It becomes a mobile sensing, communications and mission-coordination node. SAE-enabled configurations can connect:
- JJ2030A crew and vehicle
- Delta UGV platforms
- UAVs and aerial sensors
- EO/IR observation equipment
- Command centres
- Rescue teams and remote operators
- Communications and environmental sensors
The result is a shared operational picture that improves route planning, situational awareness, responder safety and coordination in areas with damaged or limited communications infrastructure.
Payload Definition
Payload allowance includes occupants, personal equipment, optional vehicle equipment and installed mission systems.
Mission Configurations
JJ2030A-RR Rapid Response and Reconnaissance
A four-person configuration for disaster assessment, emergency command, field observation and first-response operations.
SAE Edge terminal
UAV storage and charging
EO/IR observation system
Portable communications equipment
Rescue tools
Emergency energy supply
Scene lighting
JJ2030A-UGV Unmanned-System Support Vehicle
A two- or four-person configuration designed to transport, deploy, control and recover compact unmanned ground vehicles.
UGV loading and restraint system
Recovery winch
Remote-control operator station
UGV charging interface
Spare batteries and maintenance tools
SAE mission-data integration
Optional dedicated braked trailer
JJ2030A-MED Medical Evacuation Vehicle
A lightweight casualty-evacuation configuration for remote terrain and disaster-damaged areas where conventional ambulances cannot operate.
One stretcher position
Medical attendant seat
Oxygen and first-aid equipment
Medical storage
Weather-protected rear compartment
Communications and patient-monitoring equipment
JJ2030A-UTILITY Remote Operations Vehicle
A configurable personnel and cargo carrier for demanding public-service and remote-site operations.
Search and rescue
Wildland fire support
Remote energy and utility inspection
Geological and environmental surveys
Mining and infrastructure support
Anti-poaching operations
Border and government patrol
Disaster-relief logistics
Specifications
Item | Specification |
Typical overall length | 4,944 mm |
Typical overall width | 2,072 mm, excluding exterior mirrors |
Typical overall height | 1,953 mm, excluding raised spare tyre and mission equipment |
Approx. height with raised spare tyre | 2,180 mm |
Wheelbase | 3,300 mm |
Track width | 1,760 mm |
Curb weight | Not more than 2,190 kg, excluding optional equipment |
Gross vehicle weight | Not more than 3,200 kg |
Calculated payload allowance | Up to approximately 1,010 kg |
Seating | Up to 6 occupants |
Item | Specification |
Maximum specified road speed | At least 100 km/h |
Average specified cross-country speed | At least 30 km/h |
Minimum stable speed | Not more than 5 km/h |
Maximum specified road range | At least 600 km |
Minimum turning diameter | Not more than 15 m |
Maximum gradient | 60% |
Maximum side slope | 40% |
Vertical obstacle | 350 mm |
Trench crossing | 600 mm |
Fording depth | 800 mm |
Ground clearance at full load | At least 340 mm |
Approach / departure angle | At least 55° / 45° |
Item | Specification |
Engine | Cummins ISF2.8 turbocharged four-cylinder diesel |
Rated power | 110 kW at 3,200 rpm |
Peak torque | 360 N·m at 1,800 rpm |
Fuel capacity | 110 litres |
Standard transmission | Five-speed manual |
Automatic transmission | Optional, subject to configuration |
Drive system | Selectable 4×4 with high and low ranges |
Differential locks | Front and rear |
Item | Specification |
Suspension | Front and rear independent double-wishbone suspension |
Wheel travel | 350 mm |
Optional suspension | Adjustable hydropneumatic suspension |
Tyres | 305/80R18 high-performance off-road tyres |
Wheels | 18-inch aluminium wheels |
Spare wheel | Full-size |
Brakes | Four-wheel ventilated disc brakes |
Steering | Hydraulic power-assisted rack-and-pinion |
Item | Specification |
Specified operating temperature | -25°C to +46°C |
Specified storage temperature | -40°C to +70°C |
Specified operating altitude | At least 4,000 m |
Air filtration | Desert-type dual-stage air filtration |
Water crossing | Deep-water intake configuration |
Available Vehicle Options
Front and rear doors
Windscreen
Canvas roof
Automatic transmission
Adjustable hydropneumatic suspension
8,000 lb electric recovery winch
Long-range LED lighting
Special paint and mission-specific colours
SAE Edge integration
Mission communications package
Auxiliary mission-power system
UAV and UGV support equipment
Medical, rescue and logistics modules
Configuration Notice
Options and mission systems may affect curb weight, payload, dimensions, centre of gravity and vehicle performance.
FAQ
No. The JJ2030A is a full-size, diesel-powered high-mobility mission vehicle. It offers greater range, towing capacity, crew capacity and sustained operating capability than a conventional UTV.
The vehicle can carry up to six occupants. Two- and four-person configurations provide more available payload for mission equipment.
Yes. Payload includes occupants, personal equipment, optional vehicle equipment and all installed mission systems.
The vehicle can be configured to transport or support a compact UGV. Final integration depends on the UGV’s dimensions, weight, loading method, axle-load distribution and electrical requirements.
Yes. Response Mobility can configure the vehicle as an SAE Edge node for communications, situational awareness, UAV/UGV coordination and mission management.
Its compact size supports air-transport planning. Aircraft compatibility and certification must be evaluated for the selected aircraft, loading method and vehicle configuration.
Registration depends on the destination country, vehicle category, emissions configuration and local type-approval requirements. These requirements must be reviewed before quotation and delivery.
Configure the JJ2030A for Your Mission
Every operating environment is different. Tell us your:
Technical Notice
Specifications refer to the current base vehicle and may change according to product development, optional equipment and mission configuration. The base public powertrain specification is Euro III. Compliance with local emissions, safety, registration and procurement requirements must be confirmed for each destination market. Images may show optional or development equipment.